Milwaukee M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery Pack M18 48-11-1862 + FREE M18 FUEL 1/2" Hammer Drill Driver M18 2904-20

MAXIMIZE SYSTEM UPTIME AND THERMAL EFFICIENCY

From a fleet management perspective, the M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery Pack (48-11-1862) is the strategic choice for crews demanding corded-level performance without the trip hazards. By leveraging advanced cell chemistry and housing geometry, this pack delivers 50% more power while running 50% cooler than standard REDLITHIUM XC packs. This thermal advantage is critical for high-draw applications like heavy grinding or repetitive drilling, preventing the thermal shutdowns that plague inferior battery platforms and ensuring your investment maintains a peak discharge rate throughout the entire charge cycle.

• / HIGH-DEMAND OPTIMIZATION: Specifically engineered to provide massive power to M18 FUEL tools, facilitating the replacement of corded equipment on the jobsite.
• / SUPERIOR THERMAL PROTECTION: Operates 50% cooler during heavy use, protecting internal components and significantly extending the overall life of the battery pack.
• / ARCTIC PERFORMANCE: Engineered to deliver full power in extreme cold weather conditions below 0F (-18C) where other lithium packs struggle.
• / REDLINK INTELLIGENCE: Advanced electronics provide optimized performance and overload protection using total system communication between tool, battery, and charger.

WHAT'S IN THE BOX

(1) M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery Pack (48-11-1862)

HIGH-VOLUME WATER MANAGEMENT FOR THE MODERN SERVICE PLUMBER

Dealing with a water heater replacement in a tight basement or a flooded crawlspace requires speed and reliability. The M18™ Transfer Pump eliminates the hassle of finding an outlet or dragging extension cords through standing water. With its self-priming capability, you aren't wasting time manually filling the pump; you connect your 3/4" hoses and get to work immediately. The dry-run protection is a lifesaver—it senses when the water stops and shuts down the motor, preventing impeller damage while you're focused on the next part of the repair or installation.

• / Self-priming pump allows for instant setup without the need to manually prime the system.
• / Moves up to 480 gallons per hour to quickly drain water heaters and basins.
• / Generates 18 ft. of lift and 75 ft. of head height for demanding vertical transfers.
• / REDLINK™ Intelligence protects the tool by automatically shutting off when water stops flowing.
• / Durable 3/4" brass inlet and outlet connections resist stripping and jobsite wear.

WHAT'S IN THE BOX

(1) M18™ Transfer Pump (2771-20)

CORDED POWER WITHOUT THE CABLE

The Milwaukee 2880-20 M18 FUEL 4-1/2" / 5" Braking Grinder represents a significant leap in cordless engineering, delivering the sustained 11A power necessary for high-volume material removal without the logistical headaches of power cords. Designed for the fleet-focused contractor, this tool utilizes the POWERSTATE™ Brushless Motor to maintain 8,500 RPM under heavy load, ensuring that production schedules aren't hindered by tool stall-out. By integrating the RAPIDSTOP™ Brake system, which halts abrasive discs in under two seconds, this grinder provides an essential safety layer that reduces downtime between operations and protects the operator in fast-paced jobsite environments.

• / 11A Corded Power Equivalent: Provides the torque and speed required for the most aggressive grinding and cutting applications.
• / RAPIDSTOP™ Braking System: Stops all accessories in under 2 seconds to maximize safety and jobsite efficiency.
• / POWERSTATE™ Brushless Motor: Engineered specifically for the M18 FUEL system to deliver 8,500 RPM for maximum productivity.
• / REDLINK PLUS™ Intelligence: Advanced electronic cross-communication prevents tool and battery damage during extreme heavy-duty use.
• / Tool-Free Guard & Accessory Changes: Minimizes downtime with rapid adjustments without the need for additional wrenches.

WHAT'S IN THE BOX

(1) M18 FUEL™ 4-1/2" / 5" Braking Grinder (2880-20)
(1) T27 Guard
(1) T1 Clip-on Guard
(1) Side Handle
(1) Backing Flange
(1) Spanner Wrench

OPTIMIZED POWER LOGISTICS FOR THE MODULAR JOBSITE

The M18 PACKOUT Six Bay RAPID Charger represents a critical advancement in jobsite power management, bridging the gap between high-capacity storage and efficient energy replenishment. Engineered to integrate seamlessly into the PACKOUT modular ecosystem, this unit eliminates the logistical bottleneck of individual chargers scattered across a workspace. By utilizing a dual-simultaneous charging sequence, it optimizes the duty cycle of your battery fleet, ensuring that high-demand tools remain operational without the typical 40% lag found in standard charging units. This is a high-ROI investment for crews running high-output M18 batteries who cannot afford the downtime associated with sequential charging or disorganized power stations.

• / Dual-Simultaneous Charging: Charges two batteries at once to significantly reduce the rotation cycle of your power cells.
• / Rapid Charge Technology: Delivers up to 40% faster charging speeds compared to standard Milwaukee chargers, maximizing tool uptime.
• / PACKOUT Compatibility: Fully integrates into the modular storage stack for secure transport and centralized power management.
• / Integrated USB-A Port: Provides 2.1A output for charging personal electronics and small jobsite peripherals like headlamps.
• / Electronic Storage Caddies: Dedicated side storage for personal devices, keeping electronics off the floor and protected during the charge cycle.

WHAT'S IN THE BOX

(1) M18 PACKOUT Six Bay RAPID Charger (48-59-1809)

MAXIMUM TORQUE DENSITY WITH INTELLIGENT AUTOSTOP CONTROL

The Milwaukee 2904-20 represents the pinnacle of M18 FUEL engineering, delivering a staggering 1,400 in-lbs of peak torque while maintaining the most compact footprint in the professional hammer drill category. By integrating the POWERSTATE Brushless motor with a refined thermal management system, this Gen 4 powerhouse maintains higher speeds under heavy load, specifically optimized for driving 2-9/16" self-feed bits through dense dimensional lumber without stalling. Beyond raw output, the inclusion of AutoStop technology provides a critical safety layer, utilizing advanced sensors to detect bind-ups and instantly cut power, preventing wrist injury during high-torque applications. This tool is designed for the professional who demands maximum ROI through durability, featuring an all-metal chuck with carbide teeth for superior bit retention over years of heavy jobsite use.

• / POWERSTATE Brushless Motor provides the thermal capacity to drill large-diameter holes in rapid succession without motor degradation.
• / AutoStop Control Mode features a dedicated indicator light and industry-leading reaction time to prevent over-rotation during bit binds.
• / All-metal 1/2" ratcheting chuck with carbide teeth ensures maximum grip strength and corrosion resistance in harsh environments.
• / Compact 6.9-inch chassis allows for superior maneuverability and access in tight framing or mechanical spaces.

WHAT'S IN THE BOX

(1) M18 FUEL 1/2" Hammer Drill/Driver (2904-20), (1) Side Handle, (1) Belt Clip